resin binder
英 [ˈrezɪn ˈbaɪndə(r)]
美 [ˈrezn ˈbaɪndər]
网络 树脂黏结剂; 树脂粘合剂; 树脂粘结剂; 树脂结合剂
双语例句
- An underwater corrosion protection coatings based on epoxy resin as binder and a modified aliphatic amine as hardner has been developed.
以环氧树脂为基料，开发了新型的改性脂族胺固化剂配制水下用防腐蚀涂料。 - Study on the New Producing Technique and Curing Mechanism of CO_2-Cured Phenolic Resin Binder
新型CO2硬化酚醛树脂粘结剂制备技术及硬化机理的研究 - The high-solid fast drying amino hammer paint is prepared with benzoic acid modified alkyd resin and etherified melamine-formaldehyde resin as binder, hammering agent and other components.
采用苯甲酸改性的醇酸树脂和混合醚化的三聚氰胺甲醛树脂为基料，配以适量的锤纹助剂制成高固体分低温快干型氨基锤纹漆。 - Researching on the new producing technique and curing mechanism of CO_2-cured phenolic resin binder in this paper is developed to be meet the requirement.
本文新型CO2硬化酚醛树脂粘结剂的制备技术以及硬化机理的研究就是为适应这一要求而研究开发的。 - The epoxy modified organosilicane heat-resistant coatings is prepared with emery and titanium white as pigment and filler, with epoxy modified organosilicane resin as binder.
以刚玉粉和钛白粉为颜填料，以环氧改性有机硅树脂为基料，制备了环氧改性有机硅耐高温涂料。 - Air-curing anti-sticking coating is prepared with epoxy resin as binder and polytetrafluoroethylene as filler.
以环氧树脂为基料，聚四氟乙烯为填料制备了常温固化防粘涂料。 - New Epoxy Resin Binder for Cores
新的环氧树脂型芯粘结剂 - Influence of silane coupling agent on bonded strength of alkaline phenol-formaldehyde resin binder for foundry
硅烷偶联剂对铸造用碱酚醛树脂黏结强度的影响 - The Applications of PTS ── a New kind of Resin Binder to Diamond Abrasive Tools
PTS新型树脂胶粘剂在金刚石磨具中的应用 - The influence of phenolic resin binder on bending strength of green body and phase compositions of nitridation sintered silicon nitride was studied by cold isostatic pressing and nitridation sintering method.
以酚醛树脂作为结合剂，以冷等静压方法成型制备氮化烧结Si3N4-SiC复相陶瓷，研究了结合剂对坯体强度和生成材料物相组成的影响。 - Study on ester-cured nano-SiO_2/ phenol-formaldehyde resin binder
酯固化纳米SiO2/酚醛树脂粘结剂的研究 - The chapter II mainly analyzes and describes the development of resin binder technology as well as market demand, which is to give an clear introduction and description on the whole industry.
第二章主要是对树脂粘结剂工艺发展及市场需求状况进行分析和阐述，旨在对整个行业现状有个鲜明的介绍与说明。 - The results reveal that: ( 1) The property of binder influences the high-temperature properties of MAC products remarkably, and the high-temperature properties of the resin binder bonded products are better than those of the water glass bonded ones;
结果表明：结合剂的性能显著影响MAC制品的高温性能，树脂类结合剂结合试样的高温性能优于水玻璃结合的； - Relationship between resin binder content and properties of automotive friction materials
树脂粘结剂含量对汽车摩擦材料性能的影响 - Study of synthesizing phenolic resin binder by two-step technology
二步法合成酚醛树脂结合剂的研究 - Research on Component and Cure Mechanism of CO_2 Cure Phenolic Resin Binder
CO2固化碱性酚醛树脂粘结剂的组成及固化机理研究 - It was shown by experiment results that PANa resin is a non-poisonous gas hardening resin binder which has great value of research and application.
实验结果表明：该树脂是一种有研究、推广价值的无毒气体硬化树脂粘接剂。 - The paper introduces good quality and multiple-use complex epoxy resin binder and its application in anti-corrosion coating of chemical storage tanks.
本文主要阐述了性能优良、应用广泛的复合型环氧树脂粘合剂，在化工贮罐、防腐涂层的工艺和方法。 - A systematic investigation is made on the resin binder and hardener for alkaline phenolic-ester cold-setting sand system.
本文对碱性酚醛&酯自硬砂用树脂粘结剂和硬化剂进行了系统的研究。 - Preparation of a higher strength phenolic resin binder for casting
一种高强度铸造酚醛树脂的研制 - Improvement on synthesis process and additives was made to develop a new type of resin binder with low content of formaldehyde, high strength and low costs.
为生产出甲醛含量低、强度高、成本低和工艺性强的粘结剂，通过改进合成工艺及添加助剂，研制出了一种低游离醛的树脂粘结剂。 - Using this resin binder the pollution and harm of free-formaldehyde during casting production is significantly reduced.
该粘结剂的使用可在很大程度上降低铸件生产过程的游离甲醛和游离苯酚对生产环境和操作人员的污染和损害。 - Study on New Thermosetting Inorganic Resin Binder for Moulds and Cores
一种新的环保型热硬化无机高聚物铸造粘结剂研究 - The electric conduction mechanism of electroconductive adhesive was introduced and the effect of type and shape of conductive filler ( padoling) and resin binder on conductive adhesive performance was discussed.
介绍了导电胶粘剂的导电机理，讨论了导电载体（填料）的类型、形状以及粘料（树脂）等对导电胶粘剂性能的影响。 - The CO 2 phenolic resin binder system is a new molding and core making binder for cold box process, which has many advantage properties.
CO2固化碱性甲阶酚醛树脂粘结剂是一种新型的造型、制芯材料。 - The effect of the category and amount of nano SiO 2 particle on binding strength of the ester cured nano SiO 2/ phenolic resin binder was also studied by means of the measurement of sand core tensile strength.
通过砂芯拉伸强度的测定研究了纳米SiO2的种类及用量对酯固化酚醛树脂粘结剂粘结强度的影响。 - On Addition of Triphenyl Phosphate to Cold-Setting Furan Resin Binder
磷酸三苯酯对冷硬树脂砂强化作用的研究 - Thus the inner structure of the wheel is resin-metal combining binder, the surface is resin binder with pinholes.
这样砂轮的内部是树脂-金属复合结合剂结构，表层是有气孔的树脂结合剂结构。 - In order to solve the problems with common phenolic resin binder for refractory, the paper has researched phenolic resin modified by molybdic acid.
针对普通酚醛树脂（PF）作为耐火材料结合剂使用中存在的问题，研究了以钼酸改性PF的可行性。 - Its principle is adding the metal powder into the resin binder as addition, then electrolyzing after addressing the wheel, so that the metal content can be dissolved and the pinholes are formed.
其原理是把金属粉末作为添加剂混入到树脂结合剂中，在修整砂轮后进行电解处理，使其表层的金属成分溶解，形成气孔。